Отправка в тот же день для всех заказов, размещенных до 14:00 по всей Европе с использованием DPD
Нет товаров
Цены указаны с учетом НДС
Товар добавлен в корзину
Товаров в корзине: 0. Сейчас в корзине 1 товар.
Инструменты ШтубайⓇ
Откройте для себя наши 88 ссылок в этой категории : Инструменты ШтубайⓇ- 1
- 2
Sweep 1 - Double bevel straight chisel
STUB007-01The straight tool has a body placed in the centre line of the handle making for high cutting power. The blade does not bend during carving. Widths greater than 20 mm are intended for the preparation of the work, while those less than 16 mm are for finishing.Its cutting edge is straight with a double bevel.
From 32,64 €-
Carpenter's chisel
STUB001-01This tool is designed to remove material thanks to the force of a mallet or the flat of the hand. Also used for cleaning mortises and remove material gradually.
From 20,29 € -
Micro carving gouge
STUB025-09Micro tools are used in the same way as normal turning tools, but they offer better control and flexibility for meticulous work.These tools are also ideal for work on smaller lathes.
From 65,13 € -
Original ARKANSAS sharpening stone
STUB031-01Ideal for sharpening gouges, chisels, etc.
From 56,52 € -
-
Sweep 1 - Straight chisel
STUB007-02The straight tool has a body placed in the centre line of the handle making for high cutting power. The blade does not bend during carving. Widths greater than 20 mm are intended for preparation of the work, while those less than 16 mm are for finishing.The chisel has the special feature of an oblique cutting edge for cutting into the bottom of angles...
From 32,64 € -
Set of carving knives - 14 parts
STUB005-01Set including :- 1 double bevel straight chisel (l : 4 mm)- 2 straight chisels (l: 8/16 mm)- 3 straight flat gouges (l : 6/10/20 mm)- 2 straight curved gouges (l : 14/10 mm)- 2 straight U gouges (l: Set including :- 1 single bevel straight chisel (l : 6 mm)- 1 straight V tool (l: 8 mm)- 1 carving knife- whittling- 1 ARKANSAS original sharpening toolThe...
From 591,33 € -
Special chisels - Swedish model
STUB002-01"Swedish style" carpenter's chiselsThis set of tools is designed to remove material thanks to the force of a mallet or the flat of the hand. Also used for cleaning mortises and remove material gradually.
From 25,76 € -
Micro carving gouge
STUB025-10Micro tools are used in the same way as normal turning tools, but they offer better control and flexibility for meticulous work.These tools are also ideal for work on smaller lathes.
From 65,13 € -
Special oil for sharpening
STUB031-02To prevent chips from entering the pores of the stone when sharpening and to facilitate gliding, use the special oil with the Original-Arkansas sharpening stone
From 12,31 € -
Storage bag for turning tools
STUB032-02Make up your own kit!This roll bag is the ideal carrier for your turning tools.(supplied empty)
From 23,56 € -
Sweep 1 - Single bevel chisel
STUB007-03The straight tool has a body placed in the centre line of the handle making for high cutting power. The blade does not bend during carving. Its cutting edge is straight with a single bevel.Widths greater than 20 mm are intended for the preparation of the work, while those less than 16 mm are for finishing.Its cutting edge is straight with a single bevel.
From 37,74 € -
Micro skew chisel
STUB025-11Micro tools are used in the same way as normal turning tools, but they offer better control and flexibility for meticulous work.These tools are also ideal for work on smaller lathes.
From 65,13 € -
Professional chisel with 2K handle
STUB002-03Professional wood chisel with a revolutionary handle highly resistant to shocks. With its ergonomic shape, it provides comfort during use and ensures fatigue-free handling.Extra-long handle for precise control. Asymmetrical profile with non-slip rubber inserts.
From 25,01 € -
Marking gauge
STUB036-01Wooden marking gauge with graduation (150 mm) and adjusting screws.
From 24,65 € -
Set of beginner’s carving knives - 4 parts
STUB005-03This set of 4 tools is designed for beginners, little hands and simple carving work. These gouges are ideal for small figures, relief work and so much more. Comes in storage bag. Set includes:- 1 double bevel straight chisel (l: 8 mm)- 1 V-straight chisel (l: 4 mm)- 1 straight U gouge (l: 6 mm)- 1 carving knifeThe set is made up of tools with different...
From 130,50 € -
Sweep 1 - Bent chisel
STUB007-04The tool has the special feature of having a straight body and an angled end. This tool is essentially used for working vertically to horizontally. This angled tool is a must-have for finishing work, hollowing and clearing cuts without using a mallet. A shock on the handle can cause the blade to oscillate and give rise to poor cutting quality.The angled...
From 44,65 € -
Micro flat chisel
STUB025-12Micro tools are used in the same way as normal turning tools, but they offer better control and flexibility for meticulous work.These tools are also ideal for work on smaller lathes.
From 65,13 € -
Panel carrier
STUB033-01For wooden panels or chipboard, steel, plastic sheets and other plaster boards.
From 61,83 € -
Set of carving knives - 4 parts
STUB005-04This selection offers basic equipment for medium-sized carving work. Comes in storage bag.Set includes:- 1 straight flat gouge (l: 30 mm)- 1 straight curved gouge (l: 20 mm)- 1 straight U gouge (l: 25 mm)- 1 straight short gouge (l: 10 mm)The set is made up of tools with different profiles
From 181,36 € -
Sweep 1 - Fish tail chisel
STUB007-05The cutting edge of this tool is wider than the body. It penetrates more easily into intertwined shapes and openwork pieces. It is essentially used for finishing and generally by the force of the wrist.
From 31,63 € -
Micro V parting tool
STUB025-13Micro tools are used in the same way as normal turning tools, but they offer better control and flexibility for meticulous work.These tools are also ideal for work on smaller lathes.
From 65,13 € -
-
Set of carving knives - 5 parts
STUB005-05Selected by master carvers, this set of 5 tools is the perfect start for everyone: beginners, enthusiasts and future masters. Comes in storage bag.Set including:- 1 Straight chisel (l: 20 mm)- 1 straight flat gouge (l : 16 mm)- 1 straight curved gouge (l: 10 mm)- 1 short bent gouge (l: 6 mm)- 1 V-straight chisel (l: 8 mm)The set is made up of tools with...
From 190,00 € -
Sweep 3 - Straight flat gouge
STUB008-01The straight tool has a body placed in the centre line of the handle making for high cutting power. The blade does not bend during carving. Widths greater than 20 mm are intended for the preparation of the work, while those less than 16 mm are for finishing.The flat gouge allows for several effects: shaping, roughing or finishing.
From 34,05 € -
Micro 80° square scraper
STUB025-14Micro tools are used in the same way as normal turning tools, but they offer better control and flexibility for meticulous work.These tools are also ideal for work on smaller lathes.
From 95,28 € -
Set of turning tools - 3 parts
STUB005-06This set of 3 carving tools is recommended by master woodturners. Comes in storage bag.Set includes:- 1 carving gouge (l: 22 mm)- 1 bent round end scraper (l: 15 mm)- 1 mortise chisel (l: 15 x 3 mm)The set is made up of tools with different profiles
From 333,60 € -
Sweep 4 - Straight flat gouge
STUB009-01The straight tool has a body placed in the centre line of the handle making for high cutting power. The blade does not bend during carving. Widths greater than 20 mm are intended for the preparation of the work, while those less than 16 mm are for finishing.The flat gouge allows for several effects: shaping, roughing or finishing.
From 34,05 € -
Ring tool
STUB025-04This tool is designed for carving end grain. If well sharpened, a very nice finish is obtained.It is composed of two cutting edges: an external bevel for hollowing and an internal bevel for straight cuts.
From 215,61 € -
Mortise chisel
STUB025-06This tool is used to make mortises (rectangular hole, female part) to accommodate the tenon (male part) in the assembly of a part.
From 75,61 € -
Set of basic turning tools - 4 parts
STUB005-07This set of 4 carving tools is recommended by master woodturners. Comes in storage bag.Set includes:- 1 carving gouge (l: 27 mm)- 1 1 U-bowl gouge (l: 16 mm)- 1 bent round end scraper (l: 15 mm)- 1 mortise chisel (l: 15 x 6 mm)The set is made up of tools with different profiles
From 499,20 € -
Sweep 4 - Bent flat gouge
STUB009-03The tool has the special feature of having a straight body and an angled end. This tool is essentially used for vertical to horizontal work. It is the must-have for finishing work, the bent tool allows for hollowing and clearing cuts without using a mallet. A shock on the handle can cause the blade to oscillate and give rise to poor cutting quality.This...
From 38,95 € -
Set of carving knives - 20 parts
STUB005-02Set including :- 1 double bevel straight chisel (l : 25 mm)- 2 straight chisels (l: 10/20 mm)- 5 straight flat gouges (l : 6/10/16/25/50 mm) - 6 straight curved gouges (l : 10/10/16/20/25/50 mm)- 3 straight U gouges (l : 6/12/16/25 mm) - 1 single bevel straight chisel (l : 8 mm)- 1 straight V tool (l : 10 mm)The set is made up of tools with different...
From 69,20 € -
Oval skew chisel
STUB024-09The oval cut of this tool provides better stability on the tool holder and also facilitates the cutting angle, providing a perfect surface.
From 65,14 € -
Sweep 4 - Bent flat gouge
STUB009-02This tool has the special feature of having a slightly curved blade and can be used with a mallet.It allows for hollowing of the material easily and quickly.
From 42,80 € -
Bent round end scraper
STUB025-01This tool is designed to hollow or finish a round clearing.
From 109,14 € -
Set of carving knives - 6 parts
STUB021-02Set including :- 1 straight chisel ( l : 20 mm)- 2 straight flat gouges (l : 3/20 mm)- 1 straight curved gouge (l : 12 mm)- 2 straight U gouges (l : 10/16 mm)The set is made up of tools with different profiles
From 245,33 € -
Sweep 4 - Back bent flat gouge
STUB009-04The tool has the special feature of having a straight body and a back bent shape.The back bent gouge makes rounded cuts in hollow or parts hard to reach with a straight gouge.
From 41,64 € -
Set of micro carving tools - 6 parts
STUB022-02Set including 6 micro-tools with ergonomic wooden handle for maximum control during delicate but also complex carvings.
From 151,56 € -
Side cutting scraper
STUB025-02This tool is designed to hollow or finish a round clearing.
From 109,14 € -
Sweep 4 - Flat gouge
STUB009-05The straight tool has a body placed in the centre line of the handle allowing for a high cutting power.The flat gouge allows for several effects : shaping, roughing or finishing.
From 37,74 € -
Multi-shape scraper - 3 parts
STUB025-03This practical tool brings together 3 parts (round, square and pear-shaped cutters) on a single handle.
From 201,43 € -
Set of carving knives - whittling - 5 parts
STUB003-02Set of knives used for precision cutting
From 88,11 € -
Sweep 5 - Straight curved gouge
STUB010-01The straight tool has a body placed in the centre line of the handle making for high cutting power. The blade does not bend during carving. Widths greater than 20 mm are intended for the preparation of the work, while those less than 16 mm are for finishing.The curved gouge has a slight bend to free the ends of the blade to prevent it from getting stuck...
From 34,05 € -
Box of turning tools - 4 parts
STUB028-01Set including :- 1 U bowl gouge (l : 13 mm)- 1 round nose chisel (l : 20 mm) - 1 flat chisel (l : 20 mm) - 1 bent round end scraper (l : 25 mm)
From 409,43 € -
U-bowl gouge
STUB024-04This tool is a must-have for grain and chuck work for salad bowls or bowls. The U-bowl gouge can also be used for instance on the outside of bowls.
From 95,73 € -
Sweep 6 - Straight curved gouge
STUB011-01The straight tool has a body placed in the centre line of the handle making for high cutting power. The blade does not bend during carving. Widths greater than 20 mm are intended for the preparation of the work, while those less than 16 mm are for finishing.The curved gouge has a slight bend to free the ends of the blade to prevent it from getting stuck...
From 34,05 € -
U-bowl gouge
STUB029-01This tool is a must-have for grain and chuck work for salad bowls or bowls. The U-bowl gouge can also be used for instance on the outside of bowls.
From 150,52 € -
Sweep 6 - Back bent curved gouge
STUB011-02The tool has the special feature of having a straight body and a back bent shape.The back bent gouge makes rounded cuts in hollow or parts hard to reach with a straight gouge.
From 41,64 € -
Box of turning tools - 4 parts
STUB027-01Set including :- 2 carving gouges (l : 13/22 mm)- 1 double bevel chisel (l : 25 mm)- 1 mortise chisel (l : 6 mm)
From 462,69 € -
Carving gouge
STUB024-01This must-have wood turner's tool is used to round square stock with a soft touch result.
From 73,60 € -
Sweep 6 - Curved gouge
STUB011-03This tool has the special feature of having a slightly curved blade and can be used with a mallet.It allows for hollowing of the material easily and quickly.
From 37,74 € -
Carving gouge
STUB024-02This must-have wood turner's tool is used to round square stock. It is used for preliminary work to clear away as much stock as possible.
From 110,14 € -
Set of professional chisels with 2K handle
STUB002-04Set of professional wood chisels with a revolutionary handle highly resistant to shocks. With their ergonomic shape, they provide comfort during use and ensure fatigue-free handling.Extra-long handle for precise control. Asymmetrical profile with non-slip rubber inserts.STUB356104 contains widths : 12/16/20/24 mm STUB356106 contains widths :...
From 98,83 € -
Sweep 7 - Straight curved gouge
STUB012-01The straight tool has a body placed in the centre line of the handle making for high cutting power. The blade does not bend during carving. Widths greater than 20 mm are intended for the preparation of the work, while those less than 16 mm are for finishing.The curved gouge has a slight bend to free the ends of the blade to prevent it from getting stuck...
From 34,05 € -
-
Set of carpenter's chisels
STUB001-02This set of tools is designed to remove material thanks to the force of a mallet or the flat of the hand. Also used to clean mortises and gradually remove material.Red beech handle.STUB351104 contains widths : 12/16/20/24 mmSTUB351106 contains widths : 6/10/14/18/22/26 mm
From 124,54 € -
Sweep 7 - Bent curved gouge
STUB012-02This tool has the special feature of having a slightly curved blade and can be used with a mallet.It allows for hollowing of the material easily and quickly.
From 42,80 € -
Set of chisels - Swedish model
STUB002-02"Swedish style" carpenter's chiselsThis set of tools is designed to remove material thanks to the force of a mallet or the flat of the hand. Also used to clean mortises and gradually remove material.Cork handle, 130 mm long.STUB357104 contains widths : 13/16/20/24 mmSTUB357114contains widths: 12/16/20/24 mmSTUB357106contains widths : 6/10/13/16/20/26 mm...
From 103,38 € -
- 1
- 2
Filter by:
Last Posts
-
The Importance of a Well-Sharpened Knife in the Kitchen
Discover how to sharpen your kitchen knives optimally with a sharpening machine.
-
Японские пилы Takagi Shark Saw: Союз традиций и технологий для идеальных резов
Японские пилы Takagi, особенно серия Shark Saw, известны своей эффективностью и точностью.
-
Knife sharpening angle adjuster KS-123 Tormek
Set the perfect sharpening...
-
-
