Отправка в тот же день для всех заказов, размещенных до 14:00 по всей Европе с использованием DPD
Нет товаров
Цены указаны с учетом НДС
Товар добавлен в корзину
Товаров в корзине: 0. Сейчас в корзине 1 товар.
Инструменты ШтубайⓇ
Откройте для себя наши 88 ссылок в этой категории : Инструменты ШтубайⓇ- 1
- 2
Sweep 7 - Bent curved gouge
STUB012-03The tools has the special feature of having a straight body and an angled end. This tool is essentially used for vertical to horizontal work. It is the must-have for finishing work, the bent tool allows for hollowing and clearing cuts without using a mallet. A shock on the handle can cause the blade to oscillate and give rise to poor cutting quality.This...
From 39,75 €-
Captive ring tool
STUB025-05The dual tip of this tool allows to cut both sides of a ring after initial shaping with the help of a parting tool.
From 89,19 € -
Sweep 8 - Straight U gouge
STUB013-01The straight tool has a body placed in the centre line of the handle making for high cutting power. The blade does not bend during carving. Widths greater than 20 mm are intended for the preparation of the work, while those less than 16 mm are for finishing.The flat gouge allows for several effects: shaping, roughing or finishing.
From 40,64 € -
Round nose chisel
STUB024-06This tool is used to turn end grain or with the grain as well as all kinds of work.
From 65,14 € -
Sweep 8 - Back bent U gouge
STUB013-02The tool has the special feature of having a straight body and a back bent shape.The back bent gouge makes rounded cuts in hollow or hard to reach parts with a straight gouge.
From 41,64 € -
Round nose chisel "Exclusive line"
STUB029-02This tool is used to turn end grain or with the grain as well as all kinds of work.
From 111,07 € -
Sweep 9 - Straight U gouge
STUB014-01The straight tool has a body placed in the centre line of the handle making for high cutting power. The blade does not bend during carving. Widths greater than 20 mm are intended for the preparation of the work, while those less than 16 mm are for finishing.The flat gouge allows for several effects: shaping, roughing or finishing.
From 40,64 € -
Parting tool
STUB025-07This tool is double bevelled and can be used to make deep cuts, but also to cut and separate a part into two parts.
From 118,24 € -
Sweep 9 - Bent U gouge
STUB014-02This tool has the special feature of having a slightly curved blade and can be used with a mallet.It allows for hollowing of the material easily and quickly.
From 62,44 € -
Double bevel skew chisel
STUB024-05This tool is designed for surface work and to obtain an absolutely faultless finish on hard or tight grain wood.
From 65,14 € -
Sweep 10 - Straight U gouge
STUB015-01The straight tool has a body placed in the centre line of the handle making for high cutting power. The blade does not bend during carving. Widths greater than 20 mm are intended for the preparation of the work, while those less than 16 mm are for finishing.The flat gouge allows for several effects: shaping, roughing or finishing.
From 38,95 € -
Flat chisel
STUB024-07This straight cutting edge tool can be used both inside and outside the piece to be turned. It can also be useful for delicate work finishes.
From 65,14 € -
Sweep 11 - Straight short gouge
STUB016-01The straight tool has a body placed in the centre line of the handle making for high cutting power. The blade does not bend during carving. Widths greater than 20 mm are intended for the preparation of the work, while those less than 16 mm are for finishing.
From 40,64 € -
Flat chisel "Exclusive line"
STUB029-03This tool is used to turn end grain or with the grain as well as all kinds of work.
From 109,70 € -
Sweep 11 - Short bent gouge
STUB016-02This tool has the special feature of having a slightly curved blade and can be used with a mallet.It allows for hollowing of the material easily and quickly.
From 43,14 € -
Sweep 11 - Short bent gouge
STUB016-03The tool has the special feature of having a straight body and an angled end. This tool is essentially used for vertical to horizontal work. It is the must-have for finishing work, the bent tool allows for hollowing and clearing cuts without using a mallet. A shock on the handle can cause the blade to oscillate and give rise to poor cutting quality.This...
From 39,75 € -
V parting tool
STUB024-08This tool is designed to perform deep grooves thanks to its bevelled shape which reduces friction. It can also be used to hollow end wood or to part off a piece.
From 65,14 € -
Sweep 39 - Straight V tool
STUB017-01The straight tool has a body placed in the centre line of the handle making for high cutting power. The blade does not bend during carving.The blade ends in a V-shaped cutting edge, its tip has a slightly rounded or sharp angle. This tool is designed to cut straight lines as well as curves, it is often used by sculptors and furniture restorers.
From 46,52 € -
Sweep 41 - Straight V tool
STUB018-01The straight tool has a body placed in the centre line of the handle making for high cutting power. The blade does not bend during carving.The blade ends in a V-shaped cutting edge, its tip has a slightly rounded or sharp angle. This tool is designed to carve straight lines as well as curves, it is often used by sculptors and furniture restorers.
From 46,48 € -
Sweep 41 - Bent V tool
STUB018-02This tool has the special feature of having a slightly curved blade and can be used with a mallet.It allows for hollowing of the material easily and quickly.
From 50,27 € -
Sweep 41 - Bent V tool
STUB018-03The tool has the special feature of having a straight body and an angled end. This tool is essentially used for vertical to horizontal work. It is the must-have for finishing work, the bent tool allows for hollowing and clearing cuts without using a mallet. A shock on the handle can cause the blade to oscillate and give rise to poor cutting quality.The...
From 50,27 € -
Sweep 45 - Straight V tool
STUB019-01The straight tool has a body placed in the centre line of the handle making for high cutting power. The blade does not bend during carving.The blade ends in a V-shaped cutting edge, its tip has a slightly rounded or sharp angle. This tool is designed to carve straight lines as well as curves, it is often used by sculptors and furniture restorers.
From 46,52 € -
Sweep 47 - Straight V tool
STUB020-01The straight tool has a body placed in the centre line of the handle making for high cutting power. The blade does not bend during carving.The blade ends in a V-shaped cutting edge, its tip has a slightly rounded or sharp angle. This tool is designed to carve straight lines as well as curves, it is often used by sculptors and furniture restorers.
From 52,93 € -
Wood carver's mallet
STUB004-01The mallet has an ergonomic shape for sculptors to turn it in their hand and always have a good striking angle.The force with which the tool is struck increases the power of the movement limiting the effort.
From 25,76 € -
-
Carving tool
STUB022-01Micro-tool with ergonomic wooden handle for maximum control during delicate but also complex carvings.
From 22,00 € -
Riffler rasps
STUB030-01This tool is part of the rasp family, used to shape parts with complex shapes, to access corners and hard to reach surfaces.Used for meticulous modelling work.
From 21,67 € -
- 1
- 2
Filter by:
Last Posts
-
The Importance of a Well-Sharpened Knife in the Kitchen
Discover how to sharpen your kitchen knives optimally with a sharpening machine.
-
Японские пилы Takagi Shark Saw: Союз традиций и технологий для идеальных резов
Японские пилы Takagi, особенно серия Shark Saw, известны своей эффективностью и точностью.
-
Knife sharpening angle adjuster KS-123 Tormek
Set the perfect sharpening...
-
-
