Отправка в тот же день для всех заказов, размещенных до 14:00 по всей Европе с использованием DPD.
Нет товаров
Цены указаны с учетом НДС
Товар добавлен в корзину
Товаров в корзине: 0. Сейчас в корзине 1 товар.
Ручные инструменты
Откройте для себя наши 365 ссылок в этой категории : Ручные инструменты
Set of micro carving tools - 6 parts
STUB022-02Set including 6 micro-tools with ergonomic wooden handle for maximum control during delicate but also complex carvings.
From 145,03 €-
Carving gouge
STUB024-01This must-have wood turner's tool is used to round square stock with a soft touch result.
From 70,44 € -
Carving gouge
STUB024-02This must-have wood turner's tool is used to round square stock. It is used for preliminary work to clear away as much stock as possible.
From 105,40 € -
-
U-bowl gouge
STUB024-04This tool is a must-have for grain and chuck work for salad bowls or bowls. The U-bowl gouge can also be used for instance on the outside of bowls.
From 91,60 € -
Double bevel skew chisel
STUB024-05This tool is designed for surface work and to obtain an absolutely faultless finish on hard or tight grain wood.
From 62,33 € -
Round nose chisel
STUB024-06This tool is used to turn end grain or with the grain as well as all kinds of work.
From 62,33 € -
Flat chisel
STUB024-07This straight cutting edge tool can be used both inside and outside the piece to be turned. It can also be useful for delicate work finishes.
From 62,33 € -
V parting tool
STUB024-08This tool is designed to perform deep grooves thanks to its bevelled shape which reduces friction. It can also be used to hollow end wood or to part off a piece.
From 62,33 € -
Oval skew chisel
STUB024-09The oval cut of this tool provides better stability on the tool holder and also facilitates the cutting angle, providing a perfect surface.
From 62,33 € -
Bent round end scraper
STUB025-01This tool is designed to hollow or finish a round clearing.
From 104,44 € -
Side cutting scraper
STUB025-02This tool is designed to hollow or finish a round clearing.
From 104,44 € -
Multi-shape scraper - 3 parts
STUB025-03This practical tool brings together 3 parts (round, square and pear-shaped cutters) on a single handle.
From 192,75 € -
Ring tool
STUB025-04This tool is designed for carving end grain. If well sharpened, a very nice finish is obtained.It is composed of two cutting edges: an external bevel for hollowing and an internal bevel for straight cuts.
From 206,32 € -
Captive ring tool
STUB025-05The dual tip of this tool allows to cut both sides of a ring after initial shaping with the help of a parting tool.
From 85,35 € -
Mortise chisel
STUB025-06This tool is used to make mortises (rectangular hole, female part) to accommodate the tenon (male part) in the assembly of a part.
From 72,35 € -
Parting tool
STUB025-07This tool is double bevelled and can be used to make deep cuts, but also to cut and separate a part into two parts.
From 113,15 € -
-
Micro carving gouge
STUB025-09Micro tools are used in the same way as normal turning tools, but they offer better control and flexibility for meticulous work.These tools are also ideal for work on smaller lathes.
From 62,32 € -
Micro carving gouge
STUB025-10Micro tools are used in the same way as normal turning tools, but they offer better control and flexibility for meticulous work.These tools are also ideal for work on smaller lathes.
From 62,32 € -
Micro skew chisel
STUB025-11Micro tools are used in the same way as normal turning tools, but they offer better control and flexibility for meticulous work.These tools are also ideal for work on smaller lathes.
From 62,32 € -
Micro flat chisel
STUB025-12Micro tools are used in the same way as normal turning tools, but they offer better control and flexibility for meticulous work.These tools are also ideal for work on smaller lathes.
From 62,32 € -
Micro V parting tool
STUB025-13Micro tools are used in the same way as normal turning tools, but they offer better control and flexibility for meticulous work.These tools are also ideal for work on smaller lathes.
From 62,32 € -
Micro 80° square scraper
STUB025-14Micro tools are used in the same way as normal turning tools, but they offer better control and flexibility for meticulous work.These tools are also ideal for work on smaller lathes.
From 91,17 € -
Box of turning tools - 4 parts
STUB027-01Set including :- 2 carving gouges (l : 13/22 mm)- 1 double bevel chisel (l : 25 mm)- 1 mortise chisel (l : 6 mm)
From 442,77 € -
Box of turning tools - 4 parts
STUB028-01Set including :- 1 U bowl gouge (l : 13 mm)- 1 round nose chisel (l : 20 mm) - 1 flat chisel (l : 20 mm) - 1 bent round end scraper (l : 25 mm)
From 391,80 € -
U-bowl gouge
STUB029-01This tool is a must-have for grain and chuck work for salad bowls or bowls. The U-bowl gouge can also be used for instance on the outside of bowls.
From 144,04 € -
Round nose chisel "Exclusive line"
STUB029-02This tool is used to turn end grain or with the grain as well as all kinds of work.
From 106,28 € -
Flat chisel "Exclusive line"
STUB029-03This tool is used to turn end grain or with the grain as well as all kinds of work.
From 104,98 € -
Riffler rasps
STUB030-01This tool is part of the rasp family, used to shape parts with complex shapes, to access corners and hard to reach surfaces.Used for meticulous modelling work.
From 20,74 € -
Original ARKANSAS sharpening stone
STUB031-01Ideal for sharpening gouges, chisels, etc.
From 54,08 € -
Special oil for sharpening
STUB031-02To prevent chips from entering the pores of the stone when sharpening and to facilitate gliding, use the special oil with the Original-Arkansas sharpening stone
From 11,78 € -
-
Storage bag for turning tools
STUB032-02Make up your own kit!This roll bag is the ideal carrier for your turning tools.(supplied empty)
From 22,55 € -
Panel carrier
STUB033-01For wooden panels or chipboard, steel, plastic sheets and other plaster boards.
From 59,16 € -
-
Marking gauge
STUB036-01Wooden marking gauge with graduation (150 mm) and adjusting screws.
From 23,60 € - Новое
Scie japonaise de charpentier Shark Saw poignée...
TAKAGI-01.1Coupes fines, coupes transversales, ébénisterie.
From 33,08 € - Новое
Lame de remplacement pour scie japonaise de charpentier...
TAKAGI-01.2Coupes fines, coupes transversales, ébénisterie.
From 17,04 € - Новое
Scie japonaise Pro double scie Ryoba
TAKAGI-02.1Coupes transversales et longitudinales, coupes extra-fines.
From 33,97 € - Новое
Lame de remplacement pour scie japonaise double scie Ryoba
TAKAGI-03.2Coupes transversales, angulaires et longitudinales, coupes générales.
From 25,75 € - Новое
Scie japonaise double scie Ryoba
TAKAGI-03.1Coupes transversales, angulaires et longitudinales, coupes générales.
From 33,71 € - Новое
Lame de remplacement pour scie japonaise Pro double scie...
TAKAGI-02.2Coupes transversales et longitudinales, coupes extra-fines.
From 26,03 € - Новое
- Новое
Lame de remplacement pour scie japonaise multi-usage
TAKAGI-04.2Bois général, coupes rapides, élagage, pliable.
From 26,03 € - Новое
Scie japonaise Pro à queue d'aronde
TAKAGI-05.1Coupes extra-fines, coupes à ras, menuiserie.
From 20,95 € - Новое
Lame de remplacement pour scie japonaise Pro à queue...
TAKAGI-05.2Coupes extra-fines, coupes à ras, menuiserie.
From 14,57 € - Новое
Scie japonaise Pro de charpentier
TAKAGI-06.1Bois général, coupes précises, MDF, contreplaqué.
From 32,88 € - Новое
Lame de remplacement pour scie japonaise Pro de charpentier
TAKAGI-06.2Bois général, coupes précises, MDF, contreplaqué.
From 21,56 € - Новое
Scie japonaise denture extra fine Dozuki
TAKAGI-07.1Coupes très fines, ébénisterie, menuiserie.
From 29,35 € - Новое
Lame de remplacement pour scie japonaise denture extra...
TAKAGI-07.2Coupes très fines, ébénisterie, menuiserie.
From 21,08 € - Новое
Scie japonaise Pro multifonction et d'élagage
TAKAGI-08.1Élagage, usage multiple, coupes nettes.
From 33,67 € - Новое
Lame de remplacement pour scie japonaise Pro...
TAKAGI-08.2Élagage, usage multiple, coupes nettes.
From 22,36 € - Новое
Scie japonaise Pro pour bois dur et plastique
TAKAGI-09.1Bois durs, plastiques, coupes fines.
From 33,08 € - Новое
Lame de remplacement pour scie japonaise Pro pour bois...
TAKAGI-09.2Bois durs, plastiques, coupes fines.
From 21,84 € - Новое
Scie japonaise de charpentier
TAKAGI-10.1Bois général, coupes précises, MDF, contreplaqué.
From 28,36 € - Новое
Lame de remplacement pour scie japonaise de charpentier
TAKAGI-10.2Bois général, coupes précises, MDF, contreplaqué.
From 21,56 € - Новое
Scie japonaise Pro extra fine Dozuki
TAKAGI-11.1Bois général, coupes précises, MDF, contreplaqué.
From 34,60 € - Новое
Lame de remplacement pour scie japonaise Pro extra fine...
TAKAGI-11.2Bois général, coupes précises, MDF, contreplaqué
From 21,08 € - Новое
Scie japonaise Pro de charpentier large
TAKAGI-12.1Bois général, coupes rapides et larges, bois mouillé.
From 37,57 €
Filter by:
Last Posts
-
The Importance of a Well-Sharpened Knife in the Kitchen
Discover how to sharpen your kitchen knives optimally with a sharpening machine.
-
Японские пилы Takagi Shark Saw: Союз традиций и технологий для идеальных резов
Японские пилы Takagi, особенно серия Shark Saw, известны своей эффективностью и точностью.
-
Knife sharpening angle adjuster KS-123 Tormek
Set the perfect sharpening...
-
-
