Same-day shipping for all orders placed before 2 PM throughout Europe with DPD.
No products
Prices are tax included
Product successfully added to your shopping cart
There are 0 items in your cart. There is 1 item in your cart.
Hand tools
Discover our 365 references in the category : Hand tools
-
-
-
-
-
-
-
Hunter's axe with gut hook
MART028-01Vinyl GripShock Reduction GripForged in one piece out of U.S. Steel.Gut hookPerfect for Field Dressing Big Game Animals.Lightweight, Easy to Use and Carry.Hand sharpened Edges.
From 253,89 € -
Hunter's axe with gut hook
MART028-02Vinyl GripShock Reduction GripForged in one piece out of U.S. Steel.Gut hookPerfect for Field Dressing Big Game AnimalsLightweight, Easy to Use and CarryHand sharpened Edges.
From 203,12 € -
-
-
-
-
-
Shingling hammer with 3 gauge positions
MART034-01Vinyl GripShock Reduction GripMilled face
From 118,50 € -
-
-
-
-
-
-
-
-
-
-
-
Standard steel tape measure with blocage
MESU002-04Maximum measuring length of 3 measuring sticks.
From 13,89 € -
TOUGH GEAR SD tape measure
MESU002-09Nylon-coated tape measure with automatic 0 point corrector hook.Plastic shockproof cover, easy release, removable belt hook and safety cord.
From 66,79 € -
-
Aluminium sliding T bevel
MESU017-0130mm-wide arm equivalent to a carpenter's gauge. Graduation: cm and mm on one side, degrees on the other side. Non overlapping heel for measurement.
From 59,93 € -
Aluminium false square
MESU017-02250mm length. Light for inside and outside corners. Extra flat double-sided heel. Locking knob.
From 25,22 € -
Carpenter's square
MESU018-01Super thin stainless steel square. Perfect for drawing on working drawings and cheek walls. Engraved and lacquered marks. Internal and external dimensions in cm and mm.
From 37,58 € -
Carpenter's square 300 x 150 mm
MESU018-02Super thin stainless steel square. Perfect for drawing on working drawings and cheek walls. Internal and external dimensions in cm and mm.
From 7,23 € -
Square 170 x 100 mm
MESU018-03Super thin multifunction square with slight heel. For drawing on wall plates, 90°, 45° and 135° angles. Also used as a marking gauge.
From 24,71 € -
Square 115 x 150 mm
MESU018-04Super thin multifunction square with slight heel. For drawing on wall plates, 90°, 45° and 135° angles. Also used as a marking gauge.
From 17,26 € -
STAINLESS STEEL engraved 35 cm carpenter’s ruler
MESU018-05Very sturdy, made of stainless steel, 1.4 mm thick, the carpenter's ruler is graduated in cm from 0 to 35 then in mm from 0 to 150, engraved by deep acid etching on both sides.350 mm long to measure in cm from 0 to 350 then in mm from 0 to 150.The ruler has a matt anti-reflective coating and a hole centred at the end.
From 9,55 € -
-
-
Double alpha protractor
MESU018-08Marking instrument with long edge and double graduated scale.
From 109,55 € -
Alpha marking kit
MESU018-09The set of Alpha marking instruments includes high quality tools: beech wood bevel, slotted end and a carpenter's square made of seamless stainless steel with marking holes and graduated scales both sides of the long leg.
From 125,96 € -
Carpenter's kit in wooden box
MESU018-10This marking and basic measuring kit for carpenters contains a carpenter's square, a mitre square and a bevel. The three measuring instruments all have a stainless steel blade.The excellent quality handles are made of walnut with brass hardware.
From 109,11 € -
Carpenter's square
MESU018-11Seamless carpenter's square made of stainless steel The use of steel springs makes this square particularly flexible meaning it can bend without the risk of lasting deformation. The square can be easily fixed to parts and regain its initial shape. The carpenter's square is used for wooden assemblies. It allows for correct positioning of parts and...
From 34,65 € -
-
Angle square 200 x 63 mm
MESU019-01Makes it easier to draw for miter cuts. Perfect for square rafters and framing studs. 100% aluminium.
From 21,49 € -
Angle square 168 x 63 mm
MESU019-02Makes it easier to draw for miter cuts. Perfect for square rafters and framing studs. 100% aluminium.
From 19,32 € -
-
-
-
Bevel scale with level 120 x 240mm
MESU020-01Tool for setting or placing battens. Can be used to reproduce a slope by steadying the relevant angle in degrees.
From 41,94 € -
-
Profile gauge
MESU021-01These models have perfectly sliding, effortless hardened steel pins in a graduated support. Very handy to take a moulding profile or make a cut.
From 18,90 € -
Log scribe
MESU021-02Essential tool to realize all special plotting of log contruction : Carpentry, stairs, poles...
From 203,87 € -
Chalk line
MESU022-01With an integrated tip for working alone. 20 m highly resistant braided wire. Thanks to the transparent box, you can see the powder. Manual winding.
From 40,80 € -
Powdered chalk line
MESU022-027 m of 0.6mm diameter wire. Integrated tip for easy pointing. Perfect for long working drawings of framework and stairs, and for edging a table. Auto-rewind.
From 32,20 € -
Ink line
MESU022-0310 m of 0.6mm diameter wire. Integrated tip for easy pointing. Perfect for long working drawings of framework and stairs, and for edging a table. Auto-rewind and high precision.
From 40,80 € -
Chalk line powder
MESU023-01Better hold on wood supports bois and less volatile than classic powders. Highly resistant to humidity and easy cleaning.
From 7,00 € -
-
Frame plumb bob
MESU024-01For setting the verticality of walls. Integrated tip to hammer on the wall plate. 5cm grading between the wing and the end of the plumb bob. You can align the end of the plumb bob with the end of the wing at point 0. Magnetized wing for steel surface
From 87,25 € -
Marking plumb bob
MESU025-01Starfish-shaped plumb bob with eight sides, with a hole in the middle, and and crossed by a brace suspended to a chalk line. Used for placing the wood on the lines and tapping the wood.
From 48,51 € -
Crick levels
MESU026-01CRICK is a level in hardwood laminated timber with a high mechanical resistance (bending, compression and twisting) and thermal resistance (no technical loss up to 100°C). 0.015° precision glass bubbles. Stainless steel ring.
From 157,61 €
Filter by:
Last Posts
-
The Importance of a Well-Sharpened Knife in the Kitchen
Discover how to sharpen your kitchen knives optimally with a sharpening machine.
-
The Japanese Takagi Shark Saw: A blend of tradition and technology for perfect cuts
The Japanese Takagi saws, particularly the Shark Saw series, are renowned for their efficiency and precision.
-
Knife sharpening angle adjuster KS-123 Tormek
Set the perfect sharpening...
-
TAKAGI - SHARK SAW
Presentation of the Japanese...
-
